One LED Bulb Solves All Your Rear Light Troubles | Fits Cars, Motorcycles, Trucks & Boats

Tired of these annoying problems with your stock halogen bulbs?

      1.Dim factory lights make reversing hard to see obstacles, and slow brake response leads to rear-end collisions

      2.Hard to find matching bulbs for special voltage vehicles: 6V old bikes, 24V trucks, 48V electric carts

      3.Stock bulbs burn out every few months, costing you time & money on repeated replacements

      4.Uneven lighting creates blind spots when turning or reversing, raising driving risks

Our 3014 SMD LED Brake/Reverse/Turn Signal Bulb fixes all these issues at once!

✅ 360° full surround lighting, zero dark blind spots for safer driving

✅ Universal wide voltage: 6V/12V/24V/48V, works for almost all vehicles & marine vessels

✅ 50,000-hour ultra-long lifespan, no frequent bulb changes for 5+ years

✅ Plug & play installation, zero wiring modification required

✅ Ultra-low power draw, won’t drain your vehicle battery easily

Advantages

1. 360° All-Around Brightness, Avoid Traffic Accidents

with 12pcs high-bright 3014 SMD chips, the bulb emits light in every direction — unlike one-sided dim halogen lamps.

Brake Lights: Drivers behind you can clearly spot your braking from far away to prevent rear crashes

Turn Signals: Side vehicles & pedestrians instantly notice your lane change intentions

Reverse Lights: Full rear illumination at night, road curbs & small barriers are fully visible

2. 6V-48V Wide Voltage Compatibility, Multi-Vehicle Universal

Most aftermarket LED bulbs only support 12V passenger cars. Our built-in stable driver supports 6V, 12V, 24V and 48V devices directly

Perfect fit for: regular cars, motorcycles, heavy-duty trucks, camper RVs, yachts & fishing boats, electric trailers, 48V golf carts. One bulb set for all your vehicles.

3. Ultra Low Power Consumption, Protect Your Vehicle Battery

Traditional halogen P21W bulbs consume 21W power, while our LED only draws 0.78W~1.2W — cutting power use by over 95%.

without worrying about a dead battery, ideal for campers & electric vehicles.

4. 50,000 Hours Service Life, Cut Down

This LED design has no fragile tungsten filament, built to withstand bumpy truck roads & damp marine environments. Normally lasts 5 years, saving you frequent repair labor fees.

5. Plug & Play, DIY Installation In 1 Minute

Standard BA15S / BAY15D base perfectly matches your original lamp socket:

1.Pull out old bulb

2.Insert our LED bulb

3.Turn on power & done

No wire cutting, no extra resistors, no error codes for most vehicles. You can finish replacement at home without professional tools.

6. 2 Color Temperature Options For Different Scenarios

   Cool White 6000K: Best for reverse lights & rear fog lights, clearer nighttime illumination

   Warm White 4300K: Ideal for brake & turn signals, soft light with strong penetration in rain & fog

Supported Light Functions

Brake Light | Reverse Light | Turn Signal | Parking / Side Marker Light | Rear Fog Light

Compatible Vehicles & Vessels

passenger cars, electric motorcycles, vintage 6V motorbikes, 24V heavy trucks, camper RVs, travel trailers, yachts & fishing boats, 48V electric carts, sightseeing vehicles

Compatible Socket Models

1156 BA15S P21W (Single contact: Brake / Reverse / Turn Signal)

1157 BAY15D P21/5W (Dual contact: Combined Brake + Parking Light)

BA15D 1142 Universal flat pin base

FAQ

Q1: Will this bulb work for my 24V heavy truck?

A: Absolutely! Our bulb supports 6V-48V wide voltage range. It can be directly installed on 24V trucks & RVs without any voltage converter.

Q2: Will this LED trigger dashboard error codes after installation?

A: Most cars, trucks and motorcycles work plug-and-play without error codes. For a small number of European & American luxury vehicles that show error warnings, a load resistor is needed separately.

Q3: How to choose between Warm White and Cool White?

A: Pick Cool White for reverse lights to get brighter night vision; choose Warm White for brake & turn signals for better visibility in fog & rain.

Q4: How many bulbs are included in one pack?

A: Each package contains 2 bulbs, enough to replace both left and right rear lights.

Q5: Is this bulb waterproof? Will it break after car washing or rain?

A: The fully sealed glass housing resists daily rain and high-pressure car washing. Do not submerge it in water for long periods.

Guangzhou Ruixin Lighting Tech.Co.,Ltd. is a factory specialized in car led light system in Guangzhou,China.We are VIP of Carton Fair.80% products are exported,our mainly markets are USA,UK,Australia,Canada,Russia,Brazil,Germany etc. Our R&D team and better after-service team provide professional technology support and warranty.Many customers can see our products on others B2B network or social network. Welcome to any inquiry about our products or car lighting system problem.We support any orders and provide better discount for bulk order.